Dimensions
Power
- Standard 380V AC 3-Phase 50/60 Hz, 1,1 – 11 kW motor (varies depending on the number of bollards in the set to be fed and the accessories to be included).
- Operating with 24V DC in case of power failure is optionally available
Control Pack
- 24V DC powered ÖZAK PLC control unit is placed in power unit cabinet.
- 24V DC (opt.12V DC / 220V AC) solenoids
Speed
- Standard operation ~2,5 – 6 sec. (ascend/descend) depending on the number of bollards in the set to be fed.
- Fast raise up (EFO, by optional hydraulic accumulator) ~1 – 1,5 sec. and may differ depending on the number of bollards in the set and the raising height.
IP Rating
- IP55 – Hydraulic Power Unit
- IP67 – Electronics Control Unit with IP67 housing/box
- protection (optional)
- IP68 – Hydraulic Piston
Operating Temperature
-5°C / +55°C (opt. -30°C / +70°C)
Crash / Impact Rating
–
Axle Load Resistance
40 t
Hydraulic Cylinder Unit
Dust sealed, double effect hydraulic cylinder, developed for heavy duty use.
Hydraulic Power Unit and Cabinet
- Strengthened industrial hydraulic pump.
- 40 – 120 lt (depending on the number of bollards to be fed and the raising height)
- capacity oil tank with magnetic metal collector and suction filter.
- Built-in oil level and oil temperature indicator.
- Standard 55 – 120 bar pressure (depending on the number of bollards to be fed, max. 160 bar, ).
- 10m R2 type (double wire braided mesh) reinforced hydraulic hose.
- Interconnecting hoses in case of installations of multiple bollard posts.
- Motor, hydraulic pump and solenoid valves are placed in an easily accessible hot-dip-galvanized and electrostatic
powder coated steel cabinet with a built-in lock lid (opt. stainless steel cabinet).
