TAU RBLO Barrier Gate

TAU RBLO Barrier Gate – Automatic Barriers is a rapid automatic barrier, with a maximum opening of up to 4 metres, which is ideal for the control of car parks and entrances where a brief waiting time is required. In addition to the added safety of having the system, motor and all control
and safety accessories fed by a 12 Vdc power supply, the low voltage electromechanical motor also guarantees constant running even under more intense operating conditions. Operating is guaranteed in the event of a blackout by an optional 12 Volt rechargeable battery. Installation and maintenance are eased by the new control unit housing located above, just below the protective cover and above the barrier. The compartments for the electronics and mechanical parts have been separated and the side access is only opened for access to the motor and mechanical parts.

RBLO TAU Barrier Gate


  • residential / commercial use
  • for booms up to 4 m
  • opening time 1,8 seconds (RBLO-R)


  • intensive use (RBLO-R)
  • fast opening
  • ideal for busy entrances and car parks
  • it works even during power cuts thanks to the optional back-up battery kit (RBLO-R)
  • possibility to install photocells and flashing lights directly on the barrier cabinet
  • in accordance with EN 12445-12453 standards
  • self-adjusting gate stroke through optical encoder (RBLO-R)

The central section of TAU RBLO Barrier Gate is prepared to house the photocells, flashing light and key operated selector switch. Thanks to the particular bar structure (round and telescopic), transportation and fitting are made even easier, as well as notable resistance and stability to the wind thereby reducing the sail effect in the presence of extreme weather conditions. Fully-developed electronics: the control unit performs the self diagnosis of all the system’s safety devices before the movement of the bar. The opening speed can be electronically adjusted from 1.9 to 3.5 seconds with soft start and adjustable approach. Anti-crushing safety is guaranteed by an obstacle detection system that stops or inverts the barrier movement on the slightest contact with an obstacle. The number of maneuvres performed can be counted by means of a special flashing light from which a maintenance alarm threshold can be programmed.

Technical features
Power supply 230 V AC (50 – 60 Hz)
Motor power supply 18 V DC
Absorption 1 A
Power rating 250 W
Min. opening time 90° 2,2 sec.
Duty cycle 100 %
Max. torque 155 Nm
Operating temperature -20° C ÷ +55° C
Degree of protection IP 54
Max width of passage clearance 4 m
Electronic control unit K206MA
Endurance test more than 1.000.000 opening and closing maneuvers