General Information
Optima HDAB hydraulic drop arm barriers are designed especially for entrances where there is a threat of suicide vehicle attack, or for the entrances that have high security requirements. If there is a threat of vehicle attack in addition to the control of vehicle access in high security applications, hydraulic drop arm barriers are one of the best and most secure solutions. Even though the attack is from high tonnage vehicles with high speeds, it is not possible for the vehicle to keep on moving forward anymore beyond the arm of the barrier.
The drive unit is hydraulic, but in case of power failure barrier can be closed or opened manually with the help of hand pumps. With the help of PLC controlled electronics, open/close function can be achieved by every kind of card readers, biometric readers like fingerprint or hand shape, radio control, on/off key switch etc. Besides, safety accessories like photocells, inductive loop detectors, flashing lights or red/green lights can be integrated to the system.
System Features in HDAB Series
| Arm width | 3000-6000 mm |
| Color | RAL1028 traffic yellow / RAL9005 black |
| Structure | Heavy duty |
| Type of steel | S235 |
| Traffic light | Red/green LED, 200 mm diameter, steel post 2 m height and electrostatic powder coated |
| Hinges | Heavy duty, special design hardened steel |
| Power | 380 V, 3 Phase, 50-60 Hz (or 220 V/ 440 V etc., three phase, 50-60 Hz optional by a transformer) |
| Power failure | Manual hand pump, (or Hydraulic accumulator, DC motor and batteries or UPS (optional)) |
| Speed | 8-12 sec |
| Desktop keyboard | Raise, lower, emergency stop, key operated, ‘keyboard in use’ light indicator |
| Extra I/O at the PLC | Enough I/O’s to connect any card reader, extra override keyboard etc. later on |
| Proximity sensor | Available to sense the position of the barrier |
| Dual vehicle safety loop detector | This detector is used for safety (Optional) |
| Motor Power | Min 3 KW, 1500 rpm |
| Environmental conditions | -25 °C and 65 °C, %95 non-condensing humidity |
| Environmental conditions (optional) | -40 °C and 70 °C, %95 non-condensing humidity |
