HBD K12 Fixed Bollards

 

Technical Features

Crash / Impact Rating Crash tested and certified according to ASTM F2656-15 at M50 (K-12) level (HBD 275 S 100) also designed and produced to withstand impacts mentioned below:

Standard                          Vehicle Type                             Weight                        Speed
PAS 68                                           N3                                           7500 kg                80 km/h (50 mph)
IWA 14-1                                      N3C                                          7200 kg                80 km/h (50 mph)

(Please contact for applicable product dimensions.)

 

Bollard Structure Ø270 mm, solid steel and composite filled, 10 mm thick hot dip galvanised steel pipe, electrostatic powder coated in RAL9006 (optionally in other RAL colors) impact surface.
Special star-formed, 10 mm solid steel bar infilled inner structure for impact absorption distributed evenly to the whole body.
Furnished with red (opt. white or yellow) reflecting strips.
Includes 4 adjustment bolts for easy leveling, with an anchor plate of 692×692 mm welded to the impact pipe and 4 vertical anchor supports welded around the impact pipe.
Designed so that no vehicle crashing effect can displace it after embedded into the ground. 
Optional Features and Accessories Removable structure (designed and produced to withstand impacts at ASTM F2656-15 M50 (K-12), PAS 68 [N3]/80 and IWA 14-1 [N3C]/80 levels), demountable aluminium (electrostatic powder coated in body color or 304/316 grade stainless steel) bollard top lid with 360° visible red flashing LED indicators, stainless steel sleeve (304/316 grade), different colors, different product dimensions

 

Installation Easy levelling with 4 bolts and installation with C30 grade concrete and steel rebar reinforcement. Ground levelling and preparation works shall be carried on before pouring the concrete. Allowable bearing value of the ground shall be minimum 1/2 kg/cm2, if not, works shall be carried on to fulfil. Installation shall be done according to the manufacturer’s instructions