Gard 3/3000

 

Authentic Italian Quality
The 100% original Made in Italy Trademark testifies that Gard 3, like all other Came products, is the result of a quality productive
process, designed to yield technologically reliable and efficient products, which are tested to withstand 10/15 years of wear and tear under intesive duty conditions, as well as to withstand extreme temperatures, thereby including specific performance testing
with electro-magnetic interference (inductive and conductive) conditions. That is why, if properly installed, Gard 3 will last longer and without problems, even in extreme climates. It means prestige and confidence for those installing it, and safety and peace of-mind to those using it.

The New Control
Panel Enhances Perfomance
Besides the new command and safety
functions, Gard 3′s new ZL30 control panel
features numerous peculiarities that result
in total control of the operator and make for
optimal service.
• The barrier arm completely opens
in just 0.9 seconds.
• Powered by 24 V DC to be applied in
intensive use conditions.
• ENCODER-based electronic management
for obstacle detection and movement control.
• Display for viewing functions control.
• Self diagnosis of safety devices.
• Set up to house both photocells and
flashing light in the barrier body, for safe
operation and duration over time.
• Can be connected up to a back-up
generator to ensure operation even during
power failures.

Dimension (mm)

Utmost Perfomance In Just 0.9 Seconds
Engineered to control passage openings up to 2.75 m wide,
the new Gard 3 barriers are designed for intesive traffic flows
thanks to a series of features that make them especially sturdy
and reliable. The reinforced steel structure with anti-oxydation
treatment and electrostatic powder varnishing, provides long
lasting and resistance over time of its aesthetics, while the
dedicated control panel and the evolved balancing system are
for managing the required continuous operations and passive
inertia pheonomenons that are typical of quick movements.
The rounded shapes and soft corners confer a modern-design
look to the Gard 3 barrier, making it easy to integrate it in any
architectural context. The oval or round-shaped barrier arm
reduces the sail effect, typically found in windy conditions.

Strenghs
• Modern easily integrated design
• Set up for mounting accessories directly onto the barrier
• LED, high-visibility dome flashing light, integrated into the
barrier
• Reinforced steel cabinet treated with anti-oxydation
characteristics and varnishing or, made of AISI 304 steel
• Dedicated control panel with encoder-based technology for
complete control of the movement and highly sensitive obstacle
detection
• Differential spring-loaded balancing system for opening and
closing
• Speedy opening and closing movements with independent
adjustments

24 Volt Operator for Top Perfomance
The 24 V DC operator is the ideal solution to ensure
intensive use as typically found when applied to parking
lot systems and large traffic flow systems. Also, the low
voltage system allows you to connect up to a back up or
auxiliary generator unit in the event of power failures.

Total Safety Even
In Case Of Impacts

Among the solutions there is also
the special break-away barrier arm
attachment item 001G03000,
for releasing and rotating
the barrier-arm in case of impact.

Limits to use
Model 001G3000DX – 001G3000SX – 001G3000IDX – 001G3000ISX

Maximum available passage width :           2.75

 

Came is Certified as 100% Original Italian Quality by the ITPI or Italian Institute for the Safeguarding of Italian Products.

This distinction is given because besides Italian creativity and talent, Came’s policy is to engineer and design in Italy, and not relocate its assembly lines abroad. It also sources from nearby suppliers, which are tried and tested and, that have grown with the Came trademark over the last 40 years of operations.

The 100% Made in Italy original brand is testimony to a quality manufacturing process that makes technologically reliable, effective, performing products. These are all tested under extreme conditions to simulate 10-15 years of intense operation, at 40°C below and 80°C above zero. The control units are tested against magnetic interference. Download Certificated PDF

Technical features

 


Download Brochure PDF

 

Kontak Kami

Our Showroom at

Mall Taman Palem Lt.1 Blok A 82-88, Jln.Kamal Raya Outher Ring Road Cengkareng, Jakarta Barat

Office 1

Ruko Mutiara Taman Palem Blok B3 No.1, Jln. Kamal Raya Outering Road Cengkareng, Jakarta Barat
Phone : 021 29319661, 021 29038305
Fax : 02129330293

Office 2

Mall Taman Palem Lt.1 Blok A 37, 37A, 38, Jln.Kamal Raya Outher Ring Road Cengkareng, Jakarta Barat
Phone : 021 29330293

E Mail :
informasi :info@palangparkir.co.id

Marketing Fast Respond :

Anindya : 081219475241

Tommy : 085723794498

Aditya : 08176464469

Ratrianto : 08151680889

Technical Help :

Yamad : 082293850186

Dedy : 08881602953

Ridho : 081289568178