Specific solution for parking facilities and intensive duty cycles
- Brushless motor for high performance and silent operation.
- Continuous use tested for 10 million cycles (MCBF – mean cycle between failures).
- Modern design with galvanized steel cabinet with rough finish.
- Extended range power supply 120 – 230 V AC for energy saving in stand-by mode.
- Boom casing for protection against shearing in opening and closing.
- Available with high visibility red/green LEDs on the crown and on both sides of the boom.
- Available accessory for boom safety release in case of impact for high traffic applications.
- Control board with display.
- Developed with CONNECT technology for remote digital control via gateway or locally via CAME KEY.
FITTED FOR BALANCING SPRINGS
- Point A and B are the springs’ fastening points, depending on the clearance width.
- The spring attachment points A and B refer to the table above.
IMPORTANT:
In case of installation of the 803XA-0180 joint, consult the technical manual for selecting the spring.
LUMINOUS BOOM, MAXIMUM SAFETY
- The new GARD PX Brushless barriers let you install, as an accessory, the special luminous crown that uses red and green light to signal the boom’s position.
